Prof. Dr. Javad Mola Werkstofftechnik und -mechanik metallischer Werkstoffe

AUSBILDUNG

Feb. 2008 ? Feb. 2012 Promotion an der Technisch-Naturwissenschaftlichen Universit?t Pohang (POSTECH), Pohang, Südkorea

Institut: Graduate Institute of Ferrous Technology

Dissertation: Oberfl?chenqualit?t und Verformbarkeit von ferritischem Edelstahl AISI 430 (PDF DATEI)

Sept. 2003 ? Jan. 2006 Masterstudium an der Technischen Universit?t Sharif, Teheran, Iran

Fach: Materialwissenschaft und Werkstofftechnik

Dissertation: Semi-Solid Bearbeitung von A356 und ZA27 Legierungen

 Sept. 1999?Sept. 2003 Bachelorstudium an der Technischen Universit?t Isfahan, Isfahan, Iran

Fach: Werkstofftechnik

Diplomarbeit: Metallspritzverfahren von Nichteisenlegierungen

PRAKTISCHE ERFAHRUNG

Oct. 2018?heute         

Verwalter der Professur (W2) für Metallische Konstruktions- und Leichtbauwerkstoffe, 365体育投注_365网球投注 Osnabrück - University of Applied Sciences

Verantwortungen: Lehre, Forschung, Leitung des Laborbereiches Materialdesign und Werkstoffzuverl?ssigkeit

Apr. 2012?Sept. 2018

Wissenschaftlicher Mitarbeiter am Institut für Eisen- und Stahltechnologie, Technische Universit?t Bergakademie Freiberg

Verantwortungen: Forschung, Leitung des Labors für Metallographie und Phasenumwandlungen, Lehre

Lehrveranstaltungen: Eisenwerkstoffe (Wintersemester), Stahlanwendung (Sommersemester)

Sept. 2006 ? Feb. 2008

Wissenschaftlicher Mitarbeiter am Institut für Metallurgie und Werkstofftechnik, Teheran Universit?t, Teheran, Iran

Schwerpunkt: Entwicklung von weichmagnetischen Ferriten

2005 ? 2007                

Wissenschaftlicher Mitarbeiter (Teilzeit) am Forschungszentrum für Werkstoffe, Teheran, Iran

Schwerpunkt: schnelle Erstarrung mittels Schmelzspinnverfahren

2006 ? 2007                

Berater für W?rmebehandlungsverfahren, Turbine Machine m.e. Co, Teheran, Iran

Schwerpunkt: W?rmebehandlung von Edelst?hlen

2004 ? 2007                

Lehrbeauftragter, Mahan h?here Lehranstalt, Teheran, Iran

Lehrveranstaltungen: Grundlagen der Gie?ereitechnik, Gie?en von Eisen- und Nichteisen Legierungen, Metallkunde, Metallgewinnung, Technisches Englisch von Metallurgie

Apr. 2012 ? Sept. 2018   TU Bergakademie Freiberg

• Eisenwerkstoffe (Englisch)
• Stahlanwendung (Englisch)
• Spezielle Stahleigenschaften (Englisch)

Okt. 2018 ? heute           365体育投注_365网球投注 Osnabrück

• Grundlagen Werkstofftechnik (Deutsch)
• Werkstoffmechanik (Deutsch)
• H?here Festigkeitslehre für Masterstudiengang Angewandte Werkstoffwissenschaften (Deutsch)
• Teilmodul Korrosion der Lehrveranstaltung Korrosion und Schadensanalyse (Deutsch)
• High Temperature Materials für Masterstudiengang Angewandte Werkstoffwissenschaften (Englisch)
• Light Alloys für Masterstudiengang Angewandte Werkstoffwissenschaften (Englisch)

Buchkapitel

J. Mola, Considerations in the Design of Formable Austenitic Stainless Steels Based on Deformation Induced Processes, in Austenitic Stainless Steel – New Aspects, Eds. W. Borek, T. Tański, Z. Brytan, INTECH Open, link:

  https://www.intechopen.com/books/austenitic-stainless-steels-new-aspects/considerations-in-the-design-of-formable-austenitic-stainless-steels-based-on-deformation-induced-pr

Fachzeitschriften

[41]      G. Chen, G. Xu, H. Hu, X. Chen, J. Mola, Effect of Deformation during Austempering on Bainite Transformation and Retained Austenite in a Medium‐Carbon Bainitic Steel, Steel Research International (2019), In Press.

[40]      E.J. Seo, L. Cho, J.K. Kim, J. Mola, L. Zhao, S. Lee, B.C. De Cooman, Focused ion beam-induced displacive phase transformation from austenite to martensite during fabrication of quenched and partitioned steel micro-pillar, Journal of Alloys and Compounds 812 (2020), 152061.

[39]      P. Dastur, A. Zarei-Hanzaki, R. Rahimi, M. Moallemi, V. Klemm, B. C. De Cooman, J. Mola, Martensite Reversion Duality Behavior in a Cold-Rolled High Mn Transformation-Induced Plasticity Steel, Metall and Mat Trans A. (2019), In Press.

[38]      Q. Huang, M. Yao, I. Timokhina, C. Schimpf, H. Biermann, O. Volkova, B.C. De Cooman, J. Mola, Tempering Reactions and Elemental Redistribution During Tempering of Martensitic Stainless Steels, Metall and Mat Trans A. 50 (2019) 3663–3673.

[37]      M. Wendler, M. Hauser, M. Motylenko, J. Mola, L. Krüger, O. Volkova, Ultra High Strength Stainless Steels Obtained by Quenching-Deformation-Partitioning (QDP) Processing, Advanced Engineering Materials. 21 (2019) 1800571.

[36]      R. Rahimi, O. Volkova, H. Biermann, J. Mola, Thermal Analysis of the Formation and Dissolution of Cr-Rich Carbides in Al-Alloyed Stainless Steels, Advanced Engineering Materials. 21 (2019) 1800658.

[35]      M. Hauser, M. Wendler, A. Wei?, O. Volkova, J. Mola, On the Critical Driving Force for Deformation-Induced α′-Martensite Formation in Austenitic Cr–Mn–Ni Steels, Advanced Engineering Materials. 21 (2019) 1800676.

[34]      E.J. Seo, L. Cho, J.K. Kim, J. Mola, L. Zhao, B.C. De Cooman, Constituent-specific properties in quenching and partitioning (Q&P) processed steel, Materials Science and Engineering: A. 740–741 (2019) 439–444.

[33]      G. Luan, O. Volkova, J. Mola, Tensile Deformation Behavior of Medium Manganese Steels with High Carbon Concentrations and Austenitic Microstructures, Metals. 8 (2018) 902.

[32]      J. Mola, G. Luan, Q. Huang, C. Schimpf, D. Rafaja, Cementite evolution in medium manganese twinning-induced plasticity steels, Materialia. 2 (2018) 138–147.

[31]      P. Dastur, A. Zarei Hanzaki, R. Rahimi, V. Klemm, B.C. De Cooman, J. Mola, Nanoscale partitioning of Mn between austenite and martensite revealed by Curie temperature variations, Philosophical Magazine Letters. 98 (2018) 55–63.

[30]      J. Mola, G. Luan, D. Brochnow, O. Volkova, J. Wu, Tempering of Martensite and Subsequent Redistribution of Cr, Mn, Ni, Mo, and Si Between Cementite and Martensite Studied by Magnetic Measurements, Metall. Mater. Trans. A 48 (2017) 5805–5812.

[29]      Q. Huang, O. Volkova, H. Biermann, and J. Mola, Dilatometry Analysis of Dissolution of Cr-Rich Carbides in Martensitic Stainless Steels, Metall. Mater. Trans. A 48 (2017) 5771–5777.

[28]      E.J. Seo, J.K. Kim, L. Cho, J. Mola, C.Y. Oh, B.C. De Cooman, Micro-plasticity of medium Mn austenitic steel: Perfect dislocation plasticity and deformation twinning, Acta Mater. 135 (2017) 112–123.

[27]      M. Wendler, C. Ullrich, M. Hauser, L. Krüger, O. Volkova, A. Wei?, J. Mola, Quenching and partitioning (Q&P) processing of fully austenitic stainless steels, Acta Mater. 133 (2017) 346–355.

[26]      J. Mola, C. Ullrich, B. Kuang, R. Rahimi, Q. Huang, D. Rafaja, R. Ritzenhoff, Austenitic Nickel- and Manganese-Free Fe-15Cr-1Mo-0.4N-0.3C Steel: Tensile Behavior and Deformation-Induced Processes between 298 K and 503 K (25 °C and 230 °C), Metall. Mater. Trans. A. 48 (2017) 1033–1052.

[25]      Q. Huang, O. Volkova, H. Biermann, J. Mola, Tensile elongation of lean-alloy austenitic stainless steels: transformation-induced plasticity versus planar glide, Mater. Sci. Technol. 33 (2017) 1224–1230.

[24]      M. Hauser, M. Wendler, O. Fabrichnaya, O. Volkova, J. Mola, Anomalous stabilization of austenitic stainless steels at cryogenic temperatures, Mater. Sci. Eng. A. 675 (2016) 415–420.

[23]      R. Rahimi, P. Pekker, H. Biermann, O. Volkova, B.C. De Cooman, J. Mola, Volumetric changes associated with B2-(Ni,Fe)Al dissolution in an Al-alloyed ferritic steel, Mater. Des. 111 (2016) 640–645.

[22]      R. Rahimi, C. Ullrich, D. Rafaja, H. Biermann, J. Mola, Microstructural Evolution of an Al-Alloyed Duplex Stainless Steel During Tensile Deformation Between 77 K and 473 K (?196 °C and 200 °C), Metall. Mater. Trans. A. 47 (2016) 2705–2716.

[21]      R. Rahimi, C. Ullrich, V. Klemm, D. Rafaja, B.C. De Cooman, H. Biermann, J. Mola, Influence of Al on the temperature dependence of strain hardening behavior and glide planarity in Fe–Cr–Ni–Mn–C austenitic stainless steels, Mater. Sci. Eng. A. 649 (2016) 301–312.

[20]      Q. Huang, C. Schr?der, H. Biermann, O. Volkova, J. Mola, Influence of Martensite Fraction on Tensile Properties of Quenched and Partitioned (Q&P) Martensitic Stainless Steels, Steel Res. Int. 87 (2016) 1082–1094.

[19]      Q. Huang, B.C. De Cooman, H. Biermann, J. Mola, Influence of Martensite Fraction on the Stabilization of Austenite in Austenitic–Martensitic Stainless Steels, Metall. Mater. Trans. A. 47 (2016) 1947–1959.

[18]      M. Wendler, M. Hauser, O. Fabrichnaya, L. Krüger, A. Wei?, J. Mola, Thermal and deformation-induced phase transformation behavior of Fe–15Cr–3Mn–3Ni–0.1N–(0.05–0.25)C austenitic and austenitic–martensitic cast stainless steels, Mater. Sci. Eng. A. 645 (2015) 28–39.

[17]      A. Wei?, H. Gutte, J. Mola, Contributions of ε and α′ TRIP Effects to the Strength and Ductility of AISI 304 (X5CrNi18-10) Austenitic Stainless Steel, Metall. Mater. Trans. A. (2015) 1–11.

[16]      M. Hauser, M. Wendler, S. Ghosh Chowdhury, A. Wei?, J. Mola, Quantification of deformation induced α’-martensite in Fe–19Cr–3Mn–4Ni–0·15C–0·15N austenitic steel by in situ magnetic measurements, Mater. Sci. Technol. 31 (2015) 1473–1478.

[15]      J. Mola, M. Wendler, A. Wei?, B. Reichel, G. Wolf, B.C. De Cooman, Segregation-Induced Enhancement of Low-Temperature Tensile Ductility in a Cast High-Nitrogen Austenitic Stainless Steel Exhibiting Deformation-Induced α′ Martensite Formation, Metall. Mater. Trans. A. 46 (2015) 1450–1454.

[14]      M. Wendler, B. Reichel, R. Eckner, O. Fabrichnaya, L. Krüger, A. Wei?, J. Mola, Effect of Vanadium Nitride Precipitation on Martensitic Transformation and Mechanical Properties of CrMnNi Cast Austenitic Steels, Metall. Mater. Trans. A. 47 (2016) 139–151.

[13]      R. Rahimi, B.C. De Cooman, H. Biermann, J. Mola, Microstructure and mechanical properties of Al-alloyed Fe–Cr–Ni–Mn–C stainless steels, Mater. Sci. Eng. A. 618 (2014) 46–55.

[12]      M. Wendler, J. Mola, L. Krüger, A. Wei?, Experimental Quantification of the Austenite-Stabilizing Effect of Mn in CrMnNi As-Cast Stainless Steels, Steel Res. Int. 85 (2014) 803–810.

[11]      M. Wendler, A. Wei?, L. Krüger, J. Mola, A. Franke, A. Kovalev, S. Wolf, Effect of Manganese on Microstructure and Mechanical Properties of Cast High Alloyed CrMnNi-N Steels, Adv. Eng. Mater. 15 (2013) 558–565.

[10]      J. Mola, B.C. De Cooman, Quenching and Partitioning (Q&P) Processing of Martensitic Stainless Steels, Metall. Mater. Trans. A. 44 (2013) 946–967.

[9]        S.-J. Lee, J. Mola, B.C. De Cooman, Conversion Model for the Martensitic Transformation of Banded Austenite in a Ferrite Matrix, Metall. Mater. Trans. A. 43 (2012) 4921–4925.

[8]        J. Mola, I. Jung, J. Park, D. Chae, B.C. De Cooman, Ridging Control in Transformable Ferritic Stainless Steels, Metall. Mater. Trans. A. 43 (2012) 228–244.

[7]        J. Mola, B.C. De Cooman, Quenching and partitioning processing of transformable ferritic stainless steels, Scr. Mater. 65 (2011) 834–837.

[6]        I. Jung, J. Mola, D. Chae, B.C. De Cooman, Influence of the Cold Rolling and Annealing Sequence on the Ridging Behaviour of Ti-Stabilized 18% Cr Ferritic Stainless Steel, Steel Res. Int. 81 (2010) 1089–1096.

[5]        J. Mola, D. Chae, B.C. De Cooman, Dilatometric analysis of anisotropic dimensional changes in a 16 Pct Cr stainless steel with a planar banded structure, Metall. Mater. Trans. A. 41 (2010) 1429–1440.

[4]        J. Mola, D. Chae, B.C. De Cooman, Influence of texture on ridging and formability of 16%Cr ferritic stainless steel, Solid State Phenom. 160 (2010) 153–158.

[3]        J. Mola, H. Aashuri, B.S. Amirkhiz, Characterisation of phase segregation during back extrusion of ZA27 semisolid alloy, Mater. Sci. Technol. 23 (2007) 113–118.

[2]        B.S. Amirkhiz, H. Aashuri, A. Kokabi, M.A. Gharacheh, J. Mola, Joining metals by combining mechanical stirring and thermomechanical treatment to form a globular weld structure, Solid State Phenom. 116–117 (2006) 397–401.

[1]        J. Mola, H. Aashuri, B. Shalchi Amirkhiz, Phase Segregation Susceptibility of ZA27 Alloy at Different Shear Rates, Solid State Phenom. 116–117 (2006) 225–230.

Begutachtete Konferenzbeitr?ge

[1]     R. Rahimi, H. Biermann, O. Volkova, J. Mola, On the origin of subgrain boundaries during conventional solidification of austenitic stainless steels, in: IOP Conference Series: Mater. Sci, Eng. 373, 012005, WTK 2018, Chemnitz, Germany, 2018.

[2]     G. Luan, O. Volkova, J. Mola, Design of Fully Austenitic Medium Manganese Steels, in: IOP Conference Series: Mater. Sci, Eng. 373, 012002, WTK 2018, Chemnitz, Germany, 2018.

[3]      Q. Huang, O. Volkova, B.C. De Cooman, H. Biermann, J. Mola, Influence of Si addition on the carbon partitioning process in martensitic-austenitic stainless steels, in: IOP Conference Series: Mater. Sci, Eng. 373, 012001, WTK 2018, Chemnitz, Germany, 2018.

[4]      J. Mola, Mengnan Ren, On the hardness of high carbon ferrous martensite, in: IOP Conference Series: Mater. Sci, Eng. 373, 012004, WTK 2018, Chemnitz, Germany, 2018.

[5]      R. Rahimi, P. Pekker, H. Biermann, J. Mola, B2-Intermetallic Phase Characterization in a Ferritic Fe-Cr-Ni-Mn-Al-C Steel, in: 3rd Int. Conf. High Manganese Steels, Chengdu., China, 2016: pp. 676–680.  

[6]      J. Mola, Dilatometry Analysis of Cementite Precipitation in Medium Mn High Carbon Steels, in: 3rd Int. Conf. High Manganese Steels, Chengdu., China, 2016: pp. 60–63.

[7]      Q. Huang, O. Volkova, H. Biermann, J. Mola, Influence of Mn Alloying on the Mechanical Properties of Quenched and Partitioned Fe-13Cr-0.47C Stainless Steel, in: 3rd Int. Conf. High Manganese Steels, Chengdu., China, 2016: pp. 667–671.  

[8]      J. Mola, R. Ritzenhoff, B. Kuang, High tensile ductility in a conventionally martensitic Ni-and Mn-free stainless steel made austenitic by full dissolution of interstitial alloying elements, in: 8th Eur. Stainl. Steel Conf. Sci. Mark., Graz, Austria, 2015.

[9]      M. Hauser, M. Wendler, A. Wei?, J. Mola, Quantification of deformation-induced α’-martensite content in Fe-19Cr-3Mn-4Ni-0.15C-0.17N austenitic stainless steel by in-situ magnetic measurements, in: 8th Eur. Stainl. Steel Conf. Sci. Mark., Graz, Austria, 2015.  

[10]      Q. Huang, M. Wendler, J. Mola, Influence of martensite fraction on the extent of partitioning in martensitic stainless steels processed by quenching and partitioning (Q&P), in: 8th Eur. Stainl. Steel Conf. Sci. Mark., Graz, Austria, 2015. 

[11]      R. Rahimi, G. Luan, H. Biermann, J. Mola, Influence of annealing temperature on the microstructure and mechanical properties of an Al-alloyed Fe–Cr–Ni–Mn–Al–C duplex stainless steel, in: 8th Eur. Stainl. Steel Conf. Sci. Mark., Graz, Austria, 2015.  

[12]      M. Wendler, M. Hauser, B. Reichel, L. Krüger, A. Wei?, J. Mola, Strong metastable cast austenitic steels for 3rd generation AHSS applications, in: 8th Eur. Stainl. Steel Conf. Sci. Mark., Graz, Austria, 2015.  

[13]      M. Hauser, J. Mola, A. Wei?, Thermodynamic-Mechanical Modeling of Martensite Formation in Fe-19Cr-3Mn-4Ni-0.15N-0.2C Austenitic Cast Steel, in: HMnS 2014, Aachen, 2014: pp. 117–120. 

[14]      M. Wendler, J. Mola, B. Reichel, L. Krüger, A. Wei?, Temperature Dependence of Properties in an Fe-19Cr-4Ni-3Mn-0.15N-0.2C Austenitic Cast Steel, in: HMnS 2014, Aachen, 2014: pp. 407–410.  

[15]      R. Rahimi, H. Biermann, J. Mola, R. Ritzenhoff, Low-temperature tempering reactions in a high nitrogen martensitic stainless steel by magnetic saturation measurements, in: HNS 2014, Hamburg, Germany, 2014: pp. 182–190.

[16]      M. Wendler, J. Mola, B. Reichel, L. Krüger, A. Wei?, Influence of Carbon on the Microstructure and Mechanical Properties of Cast Austenitic Fe-19Cr-4Ni-3Mn-0.15N Steels, in: HNS 2014, Hamburg, Germany, 2014.  

[17]      J. Mola, E. Seo, I. Jung, B.C. De Cooman, J. Park, Cold rolling of α+ α′ dual-phase microstructure in transformable ferritic stainless steel, in: 7th Eur. Stainl. Steel Conf. Sci. Mark., Como, Italy, 2011. 

[18]      J. Mola, B.C. De Cooman, J. Park, Recrystallization behavior of α′ martensite in transformable ferritic stainless steels, in: 7th Eur. Stainl. Steel Conf. Sci. Mark., Como, Italy, 2011.  

Deutsche Forschungsgemeinschaft (DFG) Projekte:

2012 ? 2016                 Sonderforschungsbereich 799 (TRIP-Matrix Composites), Teilprojekt A2, 2. Phase

- Teilprojekttitel: Design austenitischer Stahlgusswerkstoffe

2016 ? 2020                 Sonderforschungsbereich 799 (TRIP-Matrix Composites), Teilprojekt A2, 3. Phase

- Teilprojekttitel: Design austenitischer Stahlgusswerkstoffe

2016 ? 2020                 Sonderforschungsbereich 799 (TRIP-Matrix Composites), Teilprojekt C3, 3. Phase

- Teilprojekttitel: Thermodynamisch-mechanische Modellierung des TRIP- und TWIP-Effekts in austenitischem Stahlguss

2016 ? 2019                 Sonderforschungsbereich 799 (TRIP-Matrix Composites), Teilprojekt T2, 3. Phase

- Teilprojekttitel: Herstellung von nichtrostendem und hochfestem Federband

2014 ? 2017                 Sachbeihilfe MO 2580/1-1

- Projekttitel: Temperatur-Abh?ngigkeit der mechanischen Eigenschaften in martensitisch-austenitischen nichtrostenden St?hlen erzielt durch "Quenching and Partitioning" (Q&P)-W?rmebehandlungsverfahren

2017 ? 2019                 Sachbeihilfe MO 2580/1-2

- Projekttitel: Temperatur-Abh?ngigkeit der mechanischen Eigenschaften in martensitisch-austenitischen nichtrostenden St?hlen erzielt durch "Quenching and Partitioning" (Q&P)-W?rmebehandlungsverfahren

2015 ? 2018                 Sachbeihilfe MO 2580/2-1

- Projekttitel: Entwicklung von Aluminium legierten austenitischen korrosionsbest?ndigen St?hlen

2018 ? 2020                 Sachbeihilfe MO 2580/2-2

- Projekttitel: Entwicklung von Aluminium legierten austenitischen korrosionsbest?ndigen St?hlen

2018 ? 2020                 Internationale Zusammenarbeit Internationale Kooperationsanbahnung MO 2580/5-1

- Projekttitel: Aufbau einer internationalen Kooperation auf dem Gebiet der Leichtbauwerkstoffe

Europ?ischer Fonds für regionale Entwicklung (EFRE) Projekte:

Quantitative Analyse und Optimierung der Fertigungsprozesse für hoch beanspruchteStahlseile (Hochseil)

Einsatzgrenzen von Duplexst?hlen für bioverfahrenstechnische Anlagen / DuBio

Modellierung und Simulation der Hochtemperaturaufkohlung für dynamisch beanspruchte Hochleistungsst?hle (SimkoSteel)

Sonstige Projekte:

Entwicklung von mittel Mn hoch C St?hlen (China Scholarship Coucil Stipendum)

Optimierung der Umform- und W?rmebehandlungsprozesse bei der Gestaltung von Hochleistungswerkstoffen, OptiHeat (MWK)

Bewertung mikrostruktureller kurzer Ermüdungsrisse zur Lebensdauervorhersage (BMBF)

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua.

Labor für Materialdesign und Werkstoffzuverl?ssigkeit:

/de/forschung/recherche/laboreinrichtungen-und-versuchsbetriebe/labor-fuer-materialdesign-und-werkstoffzuverlaessigkeit/

Lüders band in a round tensile specimen visualized by an infrared camera: 

https://www.youtube.com/watch?v=2E2RglYJBYI

DW Interview:

https://www.youtube.com/watch?v=mCEf6anO6qE